Telegram Group & Telegram Channel
GOLDEN AGE
Photo
To create a machine that could replicate the image on the Shroud of Turin using pure light, we need to consider the physics and engineering behind localized photothermal and photochemical reactions on linen fabric. The key challenges are:

1. Generating the Right Wavelength and Intensity of Light


2. Delivering Energy Without Destroying the Cloth


3. Creating a Controlled Image Formation Process



Step 1: Understanding the Science

Energy Requirements

Linen pyrolysis threshold: ~200–250°C (392–482°F)

Estimated power needed: At least 10 MW/m² (megawatts per square meter) for an instantaneous burn, similar to the heat radiation from a small nuclear detonation.

Duration: The exposure must be under a millisecond to avoid full combustion.


Wavelength Selection

UV light (200–400 nm): Can induce chemical changes without extreme heat.

Short-wavelength infrared (SWIR, 1–3 μm): Can heat the outermost linen fibers without penetrating deeply.

Extreme UV (EUV, ~10–100 nm): Ionizing, high-energy, and capable of modifying surface materials.


Step 2: Machine Design

A possible setup includes:

1. High-Energy Ultraviolet Laser System

Excimer laser (XeCl, 308 nm) or Free-Electron Laser (FEL)

Power output: 10–50 megawatts for pulses lasting nanoseconds

Beam shaping: Holographic phase mask to shape the light into the desired image.


2. Computer-Controlled Holographic Projection System

Uses a 3D digital mask to control beam intensity.

Ensures only the required parts of the linen surface are exposed.

Provides precise energy distribution to prevent overburning.


3. Vacuum or Low-Oxygen Environment

Prevents combustion and preserves the burnt fiber image.

Simulates conditions where a high-energy event happens without full thermal destruction.


Step 3: Fabrication Process

1. Place a pristine linen cloth (similar to the Shroud) in a controlled chamber.


2. Position a 3D digital model of the image in the machine’s optical system.


3. Fire high-intensity UV pulses at a calculated energy level to induce photochemical oxidation.


4. The image appears as a burnt-in pattern, matching the energy gradient of the projected light.



Possible Alternative: Plasma Discharge or Electron Beam

A brief but intense plasma burst could recreate the image using ionizing radiation.

An electron beam in a vacuum chamber might selectively alter the surface oxidation.


Conclusion

A machine capable of replicating the Shroud’s image would resemble a high-powered, pulsed UV laser array with a holographic projection system and a controlled atmospheric chamber to prevent fabric destruction. This setup is within modern technological capabilities, but it would require an enormous amount of energy and precise tuning to achieve an identical effect.

This means that if such an image was created by a burst of light in ancient times, it would require an energy release comparable to a small-scale nuclear event or an exotic, highly controlled light emission system—something not naturally occurring.



group-telegram.com/GoldenAgeOfMan/12730
Create:
Last Update:

To create a machine that could replicate the image on the Shroud of Turin using pure light, we need to consider the physics and engineering behind localized photothermal and photochemical reactions on linen fabric. The key challenges are:

1. Generating the Right Wavelength and Intensity of Light


2. Delivering Energy Without Destroying the Cloth


3. Creating a Controlled Image Formation Process



Step 1: Understanding the Science

Energy Requirements

Linen pyrolysis threshold: ~200–250°C (392–482°F)

Estimated power needed: At least 10 MW/m² (megawatts per square meter) for an instantaneous burn, similar to the heat radiation from a small nuclear detonation.

Duration: The exposure must be under a millisecond to avoid full combustion.


Wavelength Selection

UV light (200–400 nm): Can induce chemical changes without extreme heat.

Short-wavelength infrared (SWIR, 1–3 μm): Can heat the outermost linen fibers without penetrating deeply.

Extreme UV (EUV, ~10–100 nm): Ionizing, high-energy, and capable of modifying surface materials.


Step 2: Machine Design

A possible setup includes:

1. High-Energy Ultraviolet Laser System

Excimer laser (XeCl, 308 nm) or Free-Electron Laser (FEL)

Power output: 10–50 megawatts for pulses lasting nanoseconds

Beam shaping: Holographic phase mask to shape the light into the desired image.


2. Computer-Controlled Holographic Projection System

Uses a 3D digital mask to control beam intensity.

Ensures only the required parts of the linen surface are exposed.

Provides precise energy distribution to prevent overburning.


3. Vacuum or Low-Oxygen Environment

Prevents combustion and preserves the burnt fiber image.

Simulates conditions where a high-energy event happens without full thermal destruction.


Step 3: Fabrication Process

1. Place a pristine linen cloth (similar to the Shroud) in a controlled chamber.


2. Position a 3D digital model of the image in the machine’s optical system.


3. Fire high-intensity UV pulses at a calculated energy level to induce photochemical oxidation.


4. The image appears as a burnt-in pattern, matching the energy gradient of the projected light.



Possible Alternative: Plasma Discharge or Electron Beam

A brief but intense plasma burst could recreate the image using ionizing radiation.

An electron beam in a vacuum chamber might selectively alter the surface oxidation.


Conclusion

A machine capable of replicating the Shroud’s image would resemble a high-powered, pulsed UV laser array with a holographic projection system and a controlled atmospheric chamber to prevent fabric destruction. This setup is within modern technological capabilities, but it would require an enormous amount of energy and precise tuning to achieve an identical effect.

This means that if such an image was created by a burst of light in ancient times, it would require an energy release comparable to a small-scale nuclear event or an exotic, highly controlled light emission system—something not naturally occurring.

BY GOLDEN AGE




Share with your friend now:
group-telegram.com/GoldenAgeOfMan/12730

View MORE
Open in Telegram


Telegram | DID YOU KNOW?

Date: |

Anastasia Vlasova/Getty Images It is unclear who runs the account, although Russia's official Ministry of Foreign Affairs Twitter account promoted the Telegram channel on Saturday and claimed it was operated by "a group of experts & journalists." Stocks closed in the red Friday as investors weighed upbeat remarks from Russian President Vladimir Putin about diplomatic discussions with Ukraine against a weaker-than-expected print on U.S. consumer sentiment. But because group chats and the channel features are not end-to-end encrypted, Galperin said user privacy is potentially under threat. Also in the latest update is the ability for users to create a unique @username from the Settings page, providing others with an easy way to contact them via Search or their t.me/username link without sharing their phone number.
from no


Telegram GOLDEN AGE
FROM American